Introduction

Documentation Status Discord Build Status

Library for the DPS310 Precision Barometric Pressure Sensor

Dependencies

This driver depends on:

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-dps310

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-dps310

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .env
source .env/bin/activate
pip3 install adafruit-circuitpython-dps310

Usage Example

import time
import board
import busio
import adafruit_dps310

i2c = busio.I2C(board.SCL, board.SDA)

dps310 = adafruit_dps310.DPS310(i2c)

while True:
    print("Temperature = %.2f *C"%dps310.temperature)
    print("Pressure = %.2f hPa"%dps310.pressure)
    print("")
    time.sleep(1.0)

Caveat: by default the library initializes the IC with constant temperature and pressure measurements at 64Hz with 64 samples. It is not possible to change the IC’s mode, temperature_oversample_count or pressure_oversample_count on-the-fly so resetting the IC and operation parameteres is required. For instance, to set the mode to continuous pressure measurement at 1Hz with 2 samples:

dps310.reset()
dps310.pressure_oversample_count = adafruit_dps310.SampleCount.COUNT_2
dps310.pressure_rate = adafruit_dps310.Rate.RATE_1_HZ
dps310.mode = adafruit_dps310.Mode.CONT_PRESSURE
dps310.wait_pressure_ready()

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Documentation

For information on building library documentation, please check out this guide.

Indices and tables